spectrum • planter

spectrum · planter modern minimalist design with patterns with a screw-in plate for drainage   dimensions in mm: 100mm height version ~ x:110 · y:110 · z:100 80mm height version ~ x:88 · y:88 · z:80   important · make sure that: your filament is dry and calibrated so that it deals appropriately with printing the patterns and the tolerances on the threads your build plate is properly clean so that there aren't adhesions issues and lifts during the print the planter requires supports to print cleanly, i highly recommend to use a non bonding material as an interface layer - in this case planter is PLA and the interface layer is PETG, and the print profiles are configured as such. If you choose not to have a different material as support interface you'll need to adjust the support settings accordingly, and ensure you clean-up completely after support removal to ensure the thread locks into place   photos show printed in matte and marble brick PLA .40mm nozzle .2 layer height 10% cubic infill supports on the planter with PETG as interface layer and settings adjusted accordingly   notes includes 3mf files (system is not accepting STL uploads, so only the 3mfs will be available for this one) all photos uploaded are of the actual printed model, and are copyright protected if you enjoy this model please consider to buy me a coffee commercial licence membership available on the link below or on my patreon