speed

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x112.5mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.72mm and the Actual Thickness is 2.16mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #bb3d43 PLA BambuLab Matte Dark Red Transmission Distance: 1.5 #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Blue Gray At layer #13 (1.12mm) swap to Dark Red At layer #16 (1.36mm) swap to Sunflower Yellow At layer #20 (1.68mm) swap to White for the rest.