Sphynx Cat

Project: Sphynx_Cat_HueForge.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.2mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 4.1mm and the Actual Depth is 4.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA+ Sunlu Silver Transmission Distance: 1.5 PLA PolyLite Black Transmission Distance: 0.6 PLA PolyLite White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #13 (1.16mm) swap to Silver At layer #23 (1.96mm) swap to Black At layer #34 (2.84mm) swap to Silver At layer #39 (3.24mm) swap to White for the rest.