Spice Ghost

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in size. You can change X and Y but Z must remain the same.You may print at higher layer heights below the Min Depth of 0.48mmActual Depth is 2.2mm Filaments Used:PLA BambuLab Basic Blue Transmission Distance: 4PLA BambuLab Matte Ice Blue Transmission Distance: 3.5PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Gray Transmission Distance: 2PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filaments. Substitute as needed. Swap Instructions:Start with BlueAt layer #9 (0.8mm) swap to Ice BlueAt layer #13 (1.12mm) swap to BlackAt layer #17 (1.44mm) swap to Blue GrayAt layer #20 (1.68mm) swap to GrayAt layer #21 (1.76mm) swap to Jade White for the rest.Boost MeGot a Boost to spare? Every little bit helps the motivation. Thank you!MembershipWant to go commercial or maybe just show some love