Spice Rack (extendable)

This is Spice rack to organize your spices with easy quick access. Features: 90 to 360 degrees rotation (depending on your placement). Can stack more than 4 baskets (each extension including the rotation bar will add 100mm to the total height). Threaded top cap to tighten the rack assembly between the counter and the cabinet. Included spacers to increase the space between the basket and or to fill the height gap. Technical Numbers: The total height of the current assembly is 45cm extendable by the top cap to 47cm without the spacers. each extra basket you want to add will be 10cm (so if you want to add a 5th basket the total size will be 55cm expandable to 57cm). I included 3 spacers, 5mm, 10mm and 15mm spacers incase you need to increase the height by the included spacers. (spacers goes above the basket not under). Before you print: print plate should be cleaned with soapy water or IPA. machine should be properly maintained and lubricated. machine should be pre calibrated, Auto bed level, and pressure advance. Filament Flow rate should calibrated. Filament temperature should be optimized. I included an Assembly instruction PDF of how to fully assemble the rack - if you have any question please feel free to ask. Happy Printing ^^