Spice rack

This is a spice rack which uses 1/4" (6.35mm) dowels. There is a slot on the back side of the bracket so it mounts flush when using a 3M Command Strip. The brackets are narrow so the command strip needs to be cut in half lengthwise. If you don't have any Command Strips, any double-sided foam adhesive tape should work.

It should fit all standard size spice jars.

Directions:

1. Print one of each side
2. Cut 3 dowels to the same length
3. Glue the dowels into the holes (I used hot glue)
4. Apply command strip to the slot on the back of each bracket
5. Apply to your cabinet door

Update 2021-03-36: After 2.5 years, one of the command strips let go, so I redesigned the base to accept full width strips for better hold.

Update 2020-08-16: Added version for use in the center of the rack. Thanks @xaviervilla for the idea of making a version with the holes all the way through for use as a center support.