Thingiverse
Spice rack
von Celdr
0
Downloads
0
Likes
0
Makes
In the files above you will find all the STL files for 3D printing a spice rack. I designed it so that it fits perfectly in one of our drawers.
Because the complete rack consists of so many parts, I’ve included an image with a Bill of Materials.
All the trays (left and right) need to be glued together using super glue. The trays are designed with alignment pins so they fit neatly together. I then tapped M3 threads in all the holes. That may not strictly be necessary—you could probably drive a bolt directly into the hole—but I had an M3 tap on hand, so I used it. For the bolts I used M3 x 20 DIN 912 stainless steel bolts, although stainless steel isn’t strictly required.
During assembly, keep in mind that part “2” (the legs) should be assembled last; otherwise you won’t be able to place the top tray anymore.
Because the complete rack consists of so many parts, I’ve included an image with a Bill of Materials.
All the trays (left and right) need to be glued together using super glue. The trays are designed with alignment pins so they fit neatly together. I then tapped M3 threads in all the holes. That may not strictly be necessary—you could probably drive a bolt directly into the hole—but I had an M3 tap on hand, so I used it. For the bolts I used M3 x 20 DIN 912 stainless steel bolts, although stainless steel isn’t strictly required.
During assembly, keep in mind that part “2” (the legs) should be assembled last; otherwise you won’t be able to place the top tray anymore.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
