Spin Box

This is a fun puzzle box that has a unique trick to open it. It is completely printable and doesn't require any supports, but it does require assembly and some super glue. Spinning the box in both clockwise and counterclockwise directions uses centrifugal force to move the pins and allow the box to be opened. Assembly is pretty straighforward. The lid has two connectors that need to be attached. They are slightly asymetrical, but are designed to only fit in the correct orientation. There are also arrows that will line up when placed correctly. The box has 4 pins and 4 pin holders. Start by gluing one pin holder on each side of the box as seen below. It is VERY IMPORTANT that you not glue both holders on one side without placing the pins first. After attaching the pin holders as shown above, place one pin in each holder with the rounded end of the pin facing the middle of the box. REMEMBER to place the pin in the opposite side before gluing it in place as shown below. Move the pins