Thingiverse
Spirals1
door bbinnard
52
Downloads
51
Likes
0
Makes
The basic mathematics and geometry for this part came from a posting in the Rhino3d Grasshopper forum. The posting was about designing an airport control tower building that had some twisting spaces for windows along it's height.
I thought this design concept might be usable for an LED table lamp, so I used it as a basis for designing this part. This blog page explains how I have used this method before: http://birkbinnard.com/blog/from-architecture-to-3d-printing/
Most of my designs for LED lights are closed at the top, but so far I haven't figured out how to implement a closed top for this geometry. spirals2 will have a different overall shape and will have a much narrower top - but perhaps not a closed one.
This part printed in slightly less than 22.5 hours using a layer height of 0.200 mm and a print speed of 100 mm/sec.This lamp accommodates either a battery operated or wall powered "puck" LED light. This blog page has links for all the wall powered parts needed and shows
I thought this design concept might be usable for an LED table lamp, so I used it as a basis for designing this part. This blog page explains how I have used this method before: http://birkbinnard.com/blog/from-architecture-to-3d-printing/
Most of my designs for LED lights are closed at the top, but so far I haven't figured out how to implement a closed top for this geometry. spirals2 will have a different overall shape and will have a much narrower top - but perhaps not a closed one.
This part printed in slightly less than 22.5 hours using a layer height of 0.200 mm and a print speed of 100 mm/sec.This lamp accommodates either a battery operated or wall powered "puck" LED light. This blog page has links for all the wall powered parts needed and shows
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
