Spliff Safe

*** 2024-05-03 UPDATE *** Main Body STL updated, wall generation settings are as desired or what works best for you. 0.2mm layer height is still required. ************************ Nice little joint keeper that can also keep you entertained, stores one joint. The safety cap can easily be removed or flicked off, there is also a spot at the bottom to store the cap while using the lighter. Fits classic BIC lighters and the doob tube is 12mm ⌀ x 75mm depth. Remove stickers from lighter for best fit.PRINT SETTINGS:0.4mm nozzle IMPORTANT: 0.2mm layer height for initial and all other layers. This is needed for the floating cantilever inside the model to separate. 2 walls minimumClassic wall generation for main body (Make sure to adjust gap fill), Arachne for caps.10% infill of your choicePaint infill on long edge or try scarf joints.No supports needed Videos:Alternative method to snap the safety cap off.<figure class="i