Split Keyboard

This is a split keyboard based on technomancy's Atreus.
Info about the Atreus can be found here: https://atreus.technomancy.us/

The keyboard uses firmware built by reddit user _spindle which is a branch of TMK and can be found here: https://github.com/ahtn/tmk_keyboard/tree/master/keyboard/split_keyboard

Completed pictures and build pictures can be found here:
https://www.reddit.com/r/MechanicalKeyboards/comments/4q0g4e/fully_3d_printed_split_atreus/

The hardware used is as follows:

42 Cherry style or Matias switches
42 1N4148 Diodes
2 Arduino Pro Micros (mine are from Ebay)
4 USB Micro B Breakout Boards (mine are from Adafruit)
3 USB Micro B male connectors
1 USB A male connector
4 6mm M2 standoffs
8 M2 screws to fasten the USB breakouts to the standoffs. My screws were slightly too long so I used a nut as a washer
16 16mm M2 screws to fasten the plate to the case
16 M2 nuts to fasten the case to the plate
30AWG color coded wire
30AWG magnet wire
1 3D Printed