SplitPot Mini

3D Printed Planter with Removable Water ReservoirTested on: Bambu A1 MiniThis planter is primarydesigned for use with mineral substrates (e.g., expanded clay, perlite) and features a removable water catch basin. The design allows for proper drainage while preventing water accumulation at the root zone.Model DimensionsHeight: ~ 100 mmOuter Diameter (Top): ~ 90 mmPrint SettingsTested Material: ****** PLA Matte (Gray and White)Flow Rate: 0.9791Pressure Advance: 0.03Nozzle Temperature: 195 °CBed Temperature: 60 °C (on textured PEI sheet)Wall & Infill SettingsLayer Height: 0.16 mmWall Generator: ArachneMinimum Solid Layers: 3 (for watertightness)Note: When 3 Walls are used, there is no infillPrint SpeedsOuter Walls: 120 mm/sInner Walls: 150 mm/sInfill: 180 mm/sPrint Time and Material UsageBottom Part :Print Time: ~ 55 minutesFilament: ~ 31 g (approx. 1.1 oz)Top Part:Print Time: ~ 2.5 hoursFilament: ~ 80 g (approx. 2.8 oz)NotesEnsure the base part is printed with 100% infill to guarantee watertight performance.The planter and reservoir fit securely but can be separated easily for cleaning or draining if the Printer is accurate.Designed for indoor use with non-soil media, but can also be adapted for standard potting mix.Avoid scaling the model if you want to retain the tollerances between top and base.