Spooky Ghost String Lamp

This 3D-printed "ghost in strings" model features a cute, cartoonish ghost suspended in mid-air using thin filament-like strands that create the illusion of levitation.The ghost has round eyes, raised arms, and a flowing sheet-like body, evoking a playful Halloween vibe.The piece is showcased in an included lamp frame for RGBW puck that gives it a dual-tone lighting, for example:a cool blue glow from above and a warm amber light from below giving it a magical, otherworldly presence.Perfect as a decorative lamp or a unique Halloween display, it blends clever 3D printing techniques with atmospheric lighting for a captivating effect.SPECIAL NOTE!!!!!Try not to use the Super Tack plate, taking the print off may damage the strings. Most models with strings only use a single 0.24 layer high string, I use two. That way, if one fails, the other usually does not. There are other variations on the way, such as AMS painted, strings different color and support for the lamp and waterproof pucks. But, you also need to have proper adhesion, clean your plate and watch the print so you get the best results possible.To light it you will need the standard 3AAA RGBW pucks from ***** lab, two in total.Relatively simple, assemble the two halves using an assembly jig in the profile, it is basically two rings that will fit exactly to the two halves, just make sure you put a paper down so the glue doesn't leak and ruin your table (ask me how I know). There are nubs in the provided bases and it will keep it in place for a desktop stand, but carrying it around without gluing it, is not advised… if you are happy with it and do not wish to reuse the base for my other models, go ahead and glue it.Also, DO NOT change layer size because then the mid air strings may fail. Any issues, let me know.