Spool holder

I used 1/4-20 threaded rod and five wingnuts on the rod. I heated up the threaded rod with a torch and clamped the quick clamps over the threaded rod with binder clips and when they were cool I super glued the quick clamp to the binder clips. The quick clamps don't have a ton of grip so I only use one to help making spool changes quicker.

for the spools I used the bearings from some roller blade wheels I had laying around. You can get a pair of roller blades from a thrift store for about $8usd. There is typically a small spacer that goes between the roller blade bearing and the axle that is necessary to fit on the 1/4-20 threaded rod.