Thingiverse
Spool holder
von td52755
0
Downloads
0
Likes
0
Makes
looked for a spool holder that dident have over 3-5 part couldn't find one so made my own
3 files base spindle and cap reduces the stress on the feed gear and feed angle drastically would get a loud clicking from the driver trying to pull the heavy spool on the printer at least with the petg spool the pla spools i get don't have this issue so if your having feed issues try this may fix your problem if it was the same as mine note the base print is a long print but works grate will be posting pics once the spindle and cap are done.
Warning!!!!!! scaling down the size may effect the threading will still work if you scale down but cap becomes a press fit so i don't recommend doing this if you plan to make it out of petg as the heat could melt the threading a bit making the cap skip the track hens it becomes a press fit but will still work.
3 files base spindle and cap reduces the stress on the feed gear and feed angle drastically would get a loud clicking from the driver trying to pull the heavy spool on the printer at least with the petg spool the pla spools i get don't have this issue so if your having feed issues try this may fix your problem if it was the same as mine note the base print is a long print but works grate will be posting pics once the spindle and cap are done.
Warning!!!!!! scaling down the size may effect the threading will still work if you scale down but cap becomes a press fit so i don't recommend doing this if you plan to make it out of petg as the heat could melt the threading a bit making the cap skip the track hens it becomes a press fit but will still work.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
