Thingiverse
Spoolholder
von irondad
6
Downloads
5
Likes
1
Makes
My first thing, be gentle ;-)
Spoolholder, with adapters for 3DE pla spools.
Additional parts needed:
Rods, I use 8mm aluminum rods, other materials can be used as well, cut to length as shown on drawing, glue in place.
M8 Threaded rod, cut to length as shown on drawing.
4xM8 Nuts.
2x 608 rollerskate bearings.
The threads for the adapters are M30 in case you want to make other adapters.
I use a rubberband for braking, visible on photo.
Spoolholder, with adapters for 3DE pla spools.
Additional parts needed:
Rods, I use 8mm aluminum rods, other materials can be used as well, cut to length as shown on drawing, glue in place.
M8 Threaded rod, cut to length as shown on drawing.
4xM8 Nuts.
2x 608 rollerskate bearings.
The threads for the adapters are M30 in case you want to make other adapters.
I use a rubberband for braking, visible on photo.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
