Spreader/Scraper Kit

This is a set of spreaders/scrapers. These can be uses for spreading caulk, epoxy resin, body filler, glue, fillers, glazes, putty, etc. These also make a good scraper for things like cleaning up caulk and putty, or even removing prints from the build plate.There are 5 sizes of width (6", 3", 1.9", 1", and 0.5"). These can be used stand-alone or inserted into the printable handle. Each of the scraper/spreaders comes in 2 variants; a somewhat stiff end (marked with a “S”) , and the other variant with a more flexible end (marked with an “F”).Note: There are two original profiles; one for a textured plate and one for a smooth plate. When spreading fine material you may want a smooth bottom on the spreader.The handle can hold any of the different width and is held together with two #10-½ bolt and nut.Each profile has multiple plates and the plates were size so it will work on an A1 Mini along with any other printer size. Update May 6, 2025: Added a 3mf file for a handle