Spring Breakers Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 133.8x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5 #ffe17f PLA BambuLab Matte Lemon Yellow Transmission Distance: 4This print uses 4 unique filamentsSwap Instructions: Start with Charcoal At layer #10 (0.88mm) swap to Blue Gray At layer #12 (1.04mm) swap to Cyan At layer #19 (1.6mm) swap to Lemon Yellow for the rest.