SQ11 camera shell

Just a simple shell for the SQ11 camera. I wanted the camera to be a more visible color so when it falls it wont be lost in the grass etc. Also gives a nice surface to attach Velcro or other adhesives to without destroying the camera.

This has very thin 0.8mm walls so aprox 2 layers if your using a 0.4mm nozzle. So it doesn't add much bulk or weight to the camera.

The three versions in the thing files.
SQ11_Camera_Shell.stl uses a spring clip design to keep the camera in the housing. This works but not always as well as I would like.

SQ11 Camera with back.stl uses a backing cover to close the case. The rear cover should snap in and out snugly.

SQ11 Camera Thick TPU.stl is similar to the shell model, but redesigned with double thickened walls and a shorter stiffer latch for use with TPU filaments. This is the clear print in the photos. I strongly recommend this version if you can print TPU.