Thingiverse

SquircleMorph2

by bbinnard

8 Downloads

4 Likes

0 Makes

Yes, another combination of parts from previous postings. Since the top is basically 4-sided I opted to add 4 legs (even though 4 is not a prime number.) This print completed in a bit over 15 hours using variable layer heights and a print speed of 100 mm/sec.

bowl container vase

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

large print

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

200 mm (Large)

Est. print time

15 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for SquircleMorph2?

Any FDM printer should handle SquircleMorph2 just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

How long does it take to print SquircleMorph2?

According to the design notes, SquircleMorph2 takes approximately 15 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is SquircleMorph2 available in?

SquircleMorph2 is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is SquircleMorph2 free to download?

Yes, SquircleMorph2 is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

SquircleMorph2

Similar Models

Add to Collection