Stackable Risers for 1x4 Boards

---===[ UPDATES ]===--- 5/7/2025: I added relief pockets into the corners of the board slots to make it a little easier to get your boards in, if the corners of the board aren't perfectly smooth (READ: if you are lazy and didn't sand them after cutting them to length, like me…). 4/7/2025: I made the opening for the boards a little larger because it was too tight in some instances - I broke a few because I had to use a mallet to get them on. ---===[ DESCRIPTION ]===--- This is a set of interlocking, stackable legs designed to work with two (2) standard USA 1x4 boards positioned side-by-side to create a tiered display. Perfect for vendor markets, home, office, or anywhere you need to maximize space. I personally use them at markets to display items vertically and make the most of my table space. You can stack them as high as needed by printing more “middle” sections. They feature a half-lap dovetail system—add glue to the joints for a strong, permanent bond if desired. Each riser height