Thingiverse
STEMFIE Essentials
por Stemfie3D
4
Descargas
10
Likes
0
Makes
These build plates contain various commonly used STEMFIE parts in different sizes nestled into compact build plates measuring less than 140x140x140 mm (5 ½ inches squared), which fits comfortably in most 3D printers' build volume.
You can start by importing each .3mf file into your 3D printer's slicing software. All components are oriented to 3D-print optimally without support structures. Please ensure a flat, clean build plate and calibrate it well.
If you use a filament-based 3D printer (FDM/FFF), I recommend PLA or PETG material for making STEMFIE parts. In addition, the following printing settings work well for making STEMFIE parts.
Material: PLA filament
Layer height: 0.2 mm
Perimeters (shells): 3
Top solid layer count: 4
Bottom solid layer count: 3
Infill: 15%
Generic print speed: 50 mm/s
No support structures
For more information about the STEMFIE project and to download the complete range of parts, please visit the download page.
STEMFIE is a free and open-s
You can start by importing each .3mf file into your 3D printer's slicing software. All components are oriented to 3D-print optimally without support structures. Please ensure a flat, clean build plate and calibrate it well.
If you use a filament-based 3D printer (FDM/FFF), I recommend PLA or PETG material for making STEMFIE parts. In addition, the following printing settings work well for making STEMFIE parts.
Material: PLA filament
Layer height: 0.2 mm
Perimeters (shells): 3
Top solid layer count: 4
Bottom solid layer count: 3
Infill: 15%
Generic print speed: 50 mm/s
No support structures
For more information about the STEMFIE project and to download the complete range of parts, please visit the download page.
STEMFIE is a free and open-s
Stemfie3D también publica en
140 modelos adicionales en 5 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
