Thingiverse
"Stepped" Box
door Jebela
18
Downloads
18
Likes
0
Makes
Convert STL files to editable STEP files: [stl2stp.com](https://stl2stp.com)
I made this per request on Facebook for a recently orphaned girl and figured I'd share it on here. Its suppose to be the cube from the TV show "Out of This World" but this one opens. The default STL is 9in high and 9in wide, it can always be scaled up or down to your preference. You'll need to print the 'PinStop' STL twice, one for each end. I recommend using a cool wood or bronze filament or clear PMMA filament if you want a 'see through' box. Makes a neat box for jewelry or just decoration.
1/4in (6.35mm) dowel can be used instead of printing the 'Pin', cut it to 5+ inches (130+mm). The 'PinStop' will still fit on fine.
Link to maghikal's version: https://www.thingiverse.com/thing:3679680
I made this per request on Facebook for a recently orphaned girl and figured I'd share it on here. Its suppose to be the cube from the TV show "Out of This World" but this one opens. The default STL is 9in high and 9in wide, it can always be scaled up or down to your preference. You'll need to print the 'PinStop' STL twice, one for each end. I recommend using a cool wood or bronze filament or clear PMMA filament if you want a 'see through' box. Makes a neat box for jewelry or just decoration.
1/4in (6.35mm) dowel can be used instead of printing the 'Pin', cut it to 5+ inches (130+mm). The 'PinStop' will still fit on fine.
Link to maghikal's version: https://www.thingiverse.com/thing:3679680
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
