Thingiverse
Stereo couple bar
par InschiClack
66
Téléchargements
36
Likes
0
Makes
Stereo couple bar.
The bar has three 3/8'' 16 tpi standard microphone threads, 1 in the center and 2 on the side. The one in the center is intended to receive the mic stand/boom. You can attach the stand also to the left or right threads.
Once the screw is in place, you can slide it towards the center to adjust microphone distance.
Minimal space between mics holders 60 mm
Maximal space between mics holders 250mm
Design on freecad, with a parametric model so it could be scaled at will. Message me if you need the source files as I wrote all the datas in french.
The bar has three 3/8'' 16 tpi standard microphone threads, 1 in the center and 2 on the side. The one in the center is intended to receive the mic stand/boom. You can attach the stand also to the left or right threads.
Once the screw is in place, you can slide it towards the center to adjust microphone distance.
Minimal space between mics holders 60 mm
Maximal space between mics holders 250mm
Design on freecad, with a parametric model so it could be scaled at will. Message me if you need the source files as I wrote all the datas in french.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
