Stitch Deadpool

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Please don't forget to rate my prints, thank you The Model is 225x217.36mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 3.9 PLA BambuLab Basic Orange Transmission Distance: 7 PLA Overture Matte Pink Transmission Distance: 2.5 PLA Kexcelled Sky Blue Transmission Distance: 2.6 PLA BambuLab Basic Jade White Transmission Distance: 4.7This print uses 6 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Red At layer #14 (1.2mm) swap to Orange At layer #18 (1.52mm) swap to Pink At layer #23 (1.92mm) swap to Sky Blue At layer #26 (2.16mm) swap to Jade White for the rest. Boost MeI hope you like the print if you do please consider a boost. It's for free and it would help me a lot. Thank you