Stormlight Archive Clock

This is a Stormlight Archive inspired wall clock. I have no affiliation with Brandon Sanderson or Dragonsteel Entertainment LLC. All rights to the Knights Radiant glyph are owned by these two entities. Print Settings Printer: Tronxy Rafts: No Supports: No Resolution: .3 For the Clock and .1 For the hands Infill: 10% For the clock, 20% for the hands Filament: Generic PLA Post-Printing============= Finishing I used a clock motor from Wal-mart and based the measurements of the holes in the hands off of that. You may want to consider printing the hands a little larger (5% larger in my case) to compensate for clearance and the tolerances of your printer. Light sanding may be required for all parts to smooth and flatten edges so that they sit flush with each other, especially the edges of the four quadrants, so that they glue you use (I used Loctite Ultragel control and it worked wonderfully) has a better bond. Category: Art