Stress switch V2

Before assembling Read everything below!How to assemble: 1. In addition to the printed part, you must have screws, which you can find all the way up to buy if you don&#39;t have them.2. Assembling. Place the gear in the position as shown in the picture so that the holes are on the upper side.3. Place the planks on each side as shown in the picture.4. Place the switch in the middle, so that it fits into the holes in the gear. Then screw in the same screw and do not overtighten it, otherwise the model will break! The quality of the model may depend on the material you use! I used PLA Basic red and orange and they are different from each other. You can adjust the strength by turning the planks as shown in the picture.<img class="image_resized" style="height: auto; width: 3