Thingiverse

Stringing Test

by AnsonB

301 Downloads

190 Likes

1 Makes

#### [Go to My full list of 3D Printing Troubleshooting Guides](http://blog.ansonbiggs.com/yet-another-test-suite/)

*This is the beginning of a larger suite of test prints I am developing that can be used to calibrate your 3D printer cheaply, and quickly.*

## Summary

Stringing, also often referred to as Oozing, is when a print has small hairs or in extreme cases thick lines of the filament in between the outside perimeter of two print locations. Luckily cleanup for Stringing is generally pretty simple as long as the stringing isn't extreme. If you are unfortunate enough to have extreme stringing, then this guide and the included test print should get you up and running in no time.

*This model is fully parameterized if you have Inventor.*

## Contents

This project contains a .stl file that has 3 Cones in a line. They are set up so that they test every length from 0mm to 15mm by default. There is also a .ipt file if you have Inventor and would like to make modification

3dprint 3dtest Bench-mark Bench-marking Benchie benchmark Benchmarking Benchy calibrate calibration Calibration part calibration test easy easy print easy to print fast print guide ooze oozing print 3dprint 3dtest Bench-mark Bench-marking Benchie benchmark Benchmarking Benchy calibrate calibration Calibration part calibration test easy easy print easy to print fast print guide ooze oozing print

Source

Thingiverse

What you need to print this: Beginner Low confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer