Sunflower Bookmark Set

Story: Spring is in the air. April showers bring May flowers. Flowers: Sunflowers Bookmark SetPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 84x150mm consisting of 2 bookmarks of 40x150mm Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away. Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 8.5This print uses 4 unique filaments Swap Instructions: Start with Black At h