Sunflower Bookmarks - Hueforge

A beautiful set of hueforge sunflower bookmarks. These are 2x6 inches with curved corners and tassle holes :) Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 50.8x152.4mm in sizeYou may print at higher layer heights below the Min Depth of 0.32mmThe Max Depth is 1.7mm and the Actual Depth is 1.8mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Dark Green Transmission Distance: 2 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #4 (0.4mm) swap to Dark Green At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Yellow for the rest. If you're looking for a commercial license for any of my models, you can purchase a membership here: https://thangs.com/designer/doodleddigital Membership will grant you commercial print rights to all my items, here on Makerworld and on Thang