Sung Jinwoo hueforge

Print at 100% infill with a layer height of 0.12mm with a base layer of 0.2mmThe Model is 100x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.44mmThe Max Depth is 3.1mm and the Actual Depth is 3.2mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA Elegoo Dark Blue Transmission Distance: 3.5 PLA Sunlu Purple Transmission Distance: 6 PLA BambuLab Matte Sakura Pink Transmission Distance: 3 PLA Sunlu Meta White Transmission Distance: 8This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #5 (0.68mm) swap to Dark Blue At layer #7 (0.92mm) swap to Purple At layer #15 (1.88mm) swap to Sakura Pink At layer #20 (2.48mm) swap to White for the rest.