Sunlu E2 Riser for First Gen Unit

I bought another E2 recently and they have actually changed a few things on them specifically the feet. The First Gen units had the long metal bar with rubber feet like the S4, the Second Gen unit has four individual feet now. This riser only works with the metal bar / first generation unit. Hardware: M2 thru M5 assorted 2000 piece Kit (non self tapping but useful for everything - there's a 2240 piece M3 only kit on this same link) https://www.amazon.com/dp/B0CQJZCC9T?th=1 M3 Self Tapping 500 piece kit https://www.amazon.com/dp/B0D1R21JRR?th=1 Assembly:I used M3 self tappers for the small middle square bracket that secures both support bar halves. Same M3 self tappers to secure built support bars to each riser end.Install 2 support bars on the back side - one very top, one very bottom.Install 1 bracket in the front either at the top, feel free to print more support bars / beams to fill it up as much as you want but I wouldn't use less than three.NOTE ORIENTATION OF THE FAN ON T