Superman

Project: Superman.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 160x240mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.8mm and the Actual Depth is 2.8mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA Overture Matte Skin Transmission Distance: 0.7This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #8 (0.72mm) swap to Marine Blue At layer #12 (1.04mm) swap to Jade White At layer #13 (1.12mm) swap to Black At layer #14 (1.2mm) swap to Red At layer #19 (1.6mm) swap to Yellow At layer #20 (1.68mm) swap to Skin At layer #21 (1.76mm) swap to Jade White At lay