Suspended Ghost

A delightful and spooky Halloween decoration featuring a ghost suspended midair beneath a soft glowing light.Surrounding the ghost are charming details: a pumpkin carved with “BOO,” an upside-down bat, a frightened cat, a second ghost carrying a trick-or-treat pumpkin bag, a grave with a zombie hand reaching out, and a haunting background scene that ties it all together.This 3D printable design captures the playful yet eerie essence of Halloween. It can be printed as a single piece or in separate parts for easy painting and assembly, making it an excellent centerpiece for seasonal displays or LED-lit shadowboxes.Feel free to arrange the scene however you want, change the locations of the decor and make it truly your own!Instructions:Supports ARE NOT needed. Try not to use the Super Tack plate, taking the print off may damage the strings. When you finish printing, LET IT COOL! If you try to pull it off while it is hot, the strings will bend. This is especially true with this model, the body is very thin and fragile, the plate needs to be cold and the print will pop off without issues.Most models with strings only use a single 0.24 layer high string, I use two. That way, if one fails, the other usually does not. There are other variations on the way, such as AMS painted, strings different color and support for the lamp and waterproof pucks. But, you also need to have proper adhesion, clean your plate and watch the print so you get the best results possible.To light it you will need the standard 3AAA RGBW pucks from AliExpress or ***** lab, two in total.Relatively simple, assemble the two halves using an assembly jig in the profile, it is basically two rings that will fit exactly to the two halves, just make sure you put a paper down so the glue doesn't leak and ruin your table (ask me how I know). There are nubs in the provided bases and it will keep it in place for a desktop stand, but carrying it around without gluing it, is not advised… if you are happy with it and