Synthesis

When the mind and the heart are connected.

Print at 100% infill with a layer height of 0.2mm with a base layer of 0.32mm

Use any colors you'd like, either via AMS or by manually swapping filaments as indicated below.

Filaments Used:
   PLA BambuLab Matte Charcoal Transmission Distance: 0.8
   PLA BambuLab Basic Jade White Transmission Distance: 2
   PLA BambuLab Basic Red Transmission Distance: 1
   PLA BambuLab Matte Lemon Yellow Transmission Distance: 5

Swap Instructions:
   Start with Charcoal
   At layer #4 (0.92mm) swap to Jade White
   At layer #5 (1.12mm) swap to Red
   At layer #8 (1.72mm) swap to Lemon Yellow for the rest.

Happy printing!