Thingiverse
Table Lamp
von rAist2k7
39
Downloads
93
Likes
0
Makes
Lithophanes are 10,00 cm x 8,52 cm
- There is a little bit space for them to avoid a straight connection where the lithos can break.
- Dont forget the Lithophanes when you scale the lamp :)
- I used a M3 brass thread & screw for the top plates, so lithos can be changed. The stand is glued with the Base plate.
- I used an USB powered LED Stripe inside (the round thing in the middle is exactly for this!)
!! If you want the Roof also shining, u can mount it without the upper plate !!
- There is a little bit space for them to avoid a straight connection where the lithos can break.
- Dont forget the Lithophanes when you scale the lamp :)
- I used a M3 brass thread & screw for the top plates, so lithos can be changed. The stand is glued with the Base plate.
- I used an USB powered LED Stripe inside (the round thing in the middle is exactly for this!)
!! If you want the Roof also shining, u can mount it without the upper plate !!
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
