Thingiverse
Tablet wall mount
von zhimizhi
2
Downloads
3
Likes
0
Makes
Universal wall mount for tablet with integrated magnets.
I suggest using 12mm x 3mm neodym magnets, you'll need 12. The holes for the magnets are 14mm. When placing the magnets in the pieces, use superglue.
This piece was created for Norwegian electrical wall boxes, with a 62mm gap between the screw holes. You can use the screw holes for mounting directly on the wall or double sided tape. I suggest using Tesa tape or any other high quality tape.
The tablet is mounted with doble sided tape, clean thoroughly with a product that removes fat.
I'm planning on making a mount with integrated wireless QI charging, but still waiting on a few pieces from Ebay.
I suggest using 12mm x 3mm neodym magnets, you'll need 12. The holes for the magnets are 14mm. When placing the magnets in the pieces, use superglue.
This piece was created for Norwegian electrical wall boxes, with a 62mm gap between the screw holes. You can use the screw holes for mounting directly on the wall or double sided tape. I suggest using Tesa tape or any other high quality tape.
The tablet is mounted with doble sided tape, clean thoroughly with a product that removes fat.
I'm planning on making a mount with integrated wireless QI charging, but still waiting on a few pieces from Ebay.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
