tactical turtle

Project: tactical turtlePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.32mmThe Max Depth is 2.1mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Gray Transmission Distance: 1.8 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue Gray At layer #15 (1.28mm) swap to Gray At layer #18 (1.52mm) swap to Jade White for the rest.