Tails - Classic

Tails, a character from Sega's Sonic the Hedgehog series. Tails is a nickname for "Miles Prower", which is a pun on "miles per hour", a reference to the famed speed of Sonic the Hedgehog. Tails is a two-tailed fox, hence the nickname. He is a mechanical genius and skilled pilot. He can fly by spinning his tails like a helicopter rotor and can be seen flying in multiple games and TV shows. Two parts require supports and special printing considerations (see notes for very specific and important information).  Slicer supports are minimal for the two parts, therefore, no presupported files are included for this model. If you have the proper filament colors, no painting is needed. As presented, Tails is in proportion to my previous Sonic model. Tails can be printed without the base if you want to hang him from a shelf in order to 'fly solo', or printed with the base and one connecting part. The assembled model with the base is 205mm tall. (11/11/2023 note: The mouth.stl part is incorrectly labelled as ‘face’ in the assembly diagram.) Enjoy! ........................................................................................................... Special shoutout to maker Benoît Lussier for providing QA printing and quality feedback. ........................................................................................................... **Print Instructions:**Supports: Yes (two parts only)Resolution: .2mm (see below for printing tips suggested optional exceptions)Infill: 15% Notes:** Refer to the notes below for a few important printing and assembly instructions. ........................................................................................................... **Building the model** Colors Black: (Paramount3D PLA - Black)eye_black_righteye_black_leftnosebase_bottombase_backbase_sides (contains two parts)sole_right (to be used if printing without the base)sole_right_with_pin (to be used if printing with the base)sole_leftcuff_black_rightcuff_black_left.. Orang