TBSS intake injector rail mounting insert

I used this tapered insert glued into the bottom side of my TBSS intake injector rail mounting boss to relocate the knurled nut inserts to the bottom side of the intake. When I cut 1" off them to lower the fuel rail for my Holley injectors. I'm sure this will also work on other short style injectors requiring the 1" drop. Measure 3x cut once!!

The 2 files are as follows.....

Knurled is for the OE nutserts.

Flanged is for a 6mm1.0 flanged nut (uses 10mm socket)