Thingiverse
Temperature Tower
por 3DModUK
4
Descargas
2
Likes
0
Makes
The 'Temperature Tower' is intended not only to check for 'stringing' between the three towers but also test the capabilities of the printer in being able to print aspects of detail at different temperatures at different layers of the tower.
On the right we have a star-shaped tower which tests print quality at reproducing the star shape and each of the five points at any axis within the print.
In the middle we have a hollow cylindrical tower with dimples on the front and a ridge running up through the rear.
On the left we have a hollow rectangular tower which is smooth on the inside, has the letters '3D' on the rear, slanted cut-outs on the outside and temperature numbers on the front face.
I exported the STL file from Blender making sure that 'selected only' was set in order to observe the boolean exclusions and opened the STL file in Cura. I then sliced and exported the GCode file.
Whilst we could watch the print and set the temperatures manually, the best thing to do
On the right we have a star-shaped tower which tests print quality at reproducing the star shape and each of the five points at any axis within the print.
In the middle we have a hollow cylindrical tower with dimples on the front and a ridge running up through the rear.
On the left we have a hollow rectangular tower which is smooth on the inside, has the letters '3D' on the rear, slanted cut-outs on the outside and temperature numbers on the front face.
I exported the STL file from Blender making sure that 'selected only' was set in order to observe the boolean exclusions and opened the STL file in Cura. I then sliced and exported the GCode file.
Whilst we could watch the print and set the temperatures manually, the best thing to do
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
