Thingiverse
Temperature Tower Version 2 GCODE Files
by KateiRen
104
Downloads
76
Likes
0
Makes
Customizable Temperature Tower Version 2 from quirxi is a great tool for testing your printer.
If you don't want to mess around with OpenSCAD, Slic3r and Python - here are the GCODE files I created.
Nozzle diameter 0.4
Filament 1.75
PLA: 190 - 220 degree celsius, 5 degree steps, 60 degree heated bed
TPU+: 185 - 215 degree celsius, 5 degree steps, 60 degree heated bed
PET-G: 220 - 240 degree celsius, 5 degree steps, 70 degree heated bed
My Snapmakers nozzle seem not to take 250 degrees for a long time as people report in forum, so I stopped at 240.
If you don't want to mess around with OpenSCAD, Slic3r and Python - here are the GCODE files I created.
Nozzle diameter 0.4
Filament 1.75
PLA: 190 - 220 degree celsius, 5 degree steps, 60 degree heated bed
TPU+: 185 - 215 degree celsius, 5 degree steps, 60 degree heated bed
PET-G: 220 - 240 degree celsius, 5 degree steps, 70 degree heated bed
My Snapmakers nozzle seem not to take 250 degrees for a long time as people report in forum, so I stopped at 240.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!