Terminator T800

REGLAGES : Project: Terminator T800.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 348.45x500mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA Bambulab Basic Bronze Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Silver Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #12 (1.04mm) swap to Bronze At layer #14 (1.2mm) swap to Red At layer #15 (1.28mm) swap to Bronze At layer #18 (1.52mm) swap to Silver At layer #21 (1.76mm) swap to Jade White for the rest.