Test Box

A small enclosure I remixed from https://www.thingiverse.com/thing:645580 to use as a little test box for breadboarding guitar effects. It just requires 2 mono 1/4" jacks and a DC jack. You'll also need either a DPDT foot switch or a 3PDT foot switch, an LED and a resistor between 1K8 and 4K7 depending on if you want an indicator light inside. I went with a high resistor to minimize current draw from the LED.

You can read up on how to wire everything up here: https://stinkfoot.se/archives/2233. Use the desired wiring scheme and then run a ground wire, a 9v wire, an effect send and an effect return wire out the little holes on the top to plug into the appropriate spots on your breadboard.