Thingiverse
Testprint_01
von dendad51
0
Downloads
0
Likes
0
Makes
I want to see how my Deltaprintr is running so this test print.....
The file is for 250mm diam and thickness of 0.25mm, but in Cura, I scaled it by 0.8 to give 200mm diam. That turned out to be a good idea because the fan just cleared a pillar!
When it is finished, a micrometer can be used to measure the thickness in various places, and the diameter can be checked too.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/4koa9nveXSy
The file is for 250mm diam and thickness of 0.25mm, but in Cura, I scaled it by 0.8 to give 200mm diam. That turned out to be a good idea because the fan just cleared a pillar!
When it is finished, a micrometer can be used to measure the thickness in various places, and the diameter can be checked too.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/4koa9nveXSy
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
