Thingiverse
TH8A TactMod+
by zhutwo
22
Downloads
23
Likes
1
Makes
This is a mod for the Thrustmaster TH8/TH8A line of shifters that improves the tactile feedback when shifting into gear. It builds upon the existing spring plunger based designs to add several quality of life improvements:
>-Clamp based retention is replaced with a more secure zip-tie based solution that reduces noise and provides more vertical real estate to allow the plungers to be mounted at a slightly longer lever length, thereby increasing the resistance felt by the user.
>-Smoother contours and more optimized clearances.
>-Optimized for M10 spec spring plungers for greatest versatility.
Changes since first upload:
>-Tightened length tolerance to fit shifter chassis with minimal play, it will now be up to the user to sand down any irregularities due to printing.
>-Tightened spring plunger balance for equal play on each side.
>-Increased spring plunger spacing to give locked in feel at end of stick travel.
>-As a result of increased spacing, M10 is now the r
>-Clamp based retention is replaced with a more secure zip-tie based solution that reduces noise and provides more vertical real estate to allow the plungers to be mounted at a slightly longer lever length, thereby increasing the resistance felt by the user.
>-Smoother contours and more optimized clearances.
>-Optimized for M10 spec spring plungers for greatest versatility.
Changes since first upload:
>-Tightened length tolerance to fit shifter chassis with minimal play, it will now be up to the user to sand down any irregularities due to printing.
>-Tightened spring plunger balance for equal play on each side.
>-Increased spring plunger spacing to give locked in feel at end of stick travel.
>-As a result of increased spacing, M10 is now the r
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
