Thanos HueForge

Project: Thanos.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA Bambu Lab Black Transmission Distance: 0.3 PLA Bambu Lab Purple Transmission Distance: 2.6 PLA Bambu Lab Gold Transmission Distance: 5 PLA White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Purple At layer #14 (1.2mm) swap to Gold At layer #20 (1.68mm) swap to White for the rest.