The Flash

Speed meets texture—3D printing makes The Flash hit hard both in motion and in style! ⚡🔥 If you are interested in my work and want to learn more about me and my creations, follow me here: https://linktr.ee/Terry.creation. I’d greatly appreciate your support on Buy Me a Coffee: https://ko-fi.com/terrycreation. For commercial licenses, visit: https://patreon.com/TerryCreation.Boost Me Printing InstructionsPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.2mmThe Model is 132x220mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 6 unique filament