Thingiverse
The GPU Support System
door 3DFreeman
16
Downloads
29
Likes
0
Makes
Listen up!
Graphics cards require support.
Your GPU is straining to hold up the weight of all those cores, polygons, and shadery things.
Lend it a hand with The GPU Support System!
100+ parts of glorious printed plastic, just waiting to be utilised under a fat, sagging, hot graphics processing unit. Happy days.
---
OK, enough of that, try to print the Tops (ending in _T30 _T48... etc) with the seem running down (or along side) the valley cut into the thread, it will help produce an easier time threading them into the base.
The bridges are there to help but are not a cure all, depending on the thickness chosen and the filament type used, they may still bend. So if you have reverse fans on the base of your case with the blades pointing up and no motor hub struts to help out, your asking for trouble.
REMEMBER: Be safe, try these parts with your machine turned off.
--- $3 PCCD SUPPORTERS DLC NOW AVAILABLE FROM MY PATREON STORE! ---
PATREON
Graphics cards require support.
Your GPU is straining to hold up the weight of all those cores, polygons, and shadery things.
Lend it a hand with The GPU Support System!
100+ parts of glorious printed plastic, just waiting to be utilised under a fat, sagging, hot graphics processing unit. Happy days.
---
OK, enough of that, try to print the Tops (ending in _T30 _T48... etc) with the seem running down (or along side) the valley cut into the thread, it will help produce an easier time threading them into the base.
The bridges are there to help but are not a cure all, depending on the thickness chosen and the filament type used, they may still bend. So if you have reverse fans on the base of your case with the blades pointing up and no motor hub struts to help out, your asking for trouble.
REMEMBER: Be safe, try these parts with your machine turned off.
--- $3 PCCD SUPPORTERS DLC NOW AVAILABLE FROM MY PATREON STORE! ---
PATREON
3DFreeman publiceert ook op
371 extra modellen op 4 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
