The Jocker

Project: JOKER.hfpPrint at 100% infill with a layer height of 0.12mm with a base layer of 0.24mmThe Model is 200x196.67mm in sizeYou may print at higher layer heights below the Min Depth of 0.36mmThe Max Depth is 2mm and the Actual Depth is 1.8mmFilaments Used: PLA ESUN NEGRO Transmission Distance: 0.2 PLA GST VERDE METAL Transmission Distance: 1 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with NEGRO At layer #5 (0.72mm) swap to VERDE METAL At layer #8 (1.08mm) swap to Jade White for the rest.